P07-Imperial-DK-Bucket

Imperial DK Heavy Duty Bucket

pdf download

HDPE / Nylon / PU

High strength deep bucket for agricultural application.

P07-Imperial-DK-Bucket-Drawing-

Model Bucket Dimension (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C From Top D Hole Centres E No. of Holes Hole Diameter Water Level (Z-Y) Water Level
(Z-Y)+10%
DK7X5 205 142 127 30 120 2 9 1.34 1.47
DK8X5 225 142 127 30 120 2 9 1.47 1.62
DK9X5 253 142 127 30 85 3 9 1.75 1.93
DK10X5 279 142 127 30 90 3 9 1.91 2.1
DK11X5 298 142 127 30 100 3 9 2.01 2.21
DK12X5 326 142 127 30 85 4 9 2.2 2.42
DK8X6 229 168 152 40 120 2 9 2.2 2.42
DK9X6 257 168 152 40 85 3 9 2.41 2.65
DK10X6 283 168 152 40 90 3 9 2.66 2.93
DK11X6 302 168 152 40 100 3 9 2.84 3.12
DK12X6 330 168 152 40 85 4 9 3.16 3.48
DK13X6 349 168 152 40 85 4 9 3.44 3.78
DK14X6 378 168 152 40 95 4 9 3.77 4.15
DK10X7 285 200 178 45 90 3 9 3.7 4.07
DK11X7 304 200 178 45 100 3 9 3.95 4.35
DK12X7 329 200 178 45 85 4 9 4.38 4.82
DK13X7 351 200 178 45 90 4 9 5.07 5.58
DK14X7 380 200 178 45 95 4 9 5.22 5.74
DK15X7 405 200 178 45 100 4 9 6.07 6.68
DK16X7 440 200 178 45 85 5 9 6.32 6.95
DK11X8 310 225 205 50 65 4 9 5.38 5.92
DK12X8 338 225 205 50 85 4 9 5.86 6.44
DK13X8 357 225 205 50 90 4 9 6.48 7.13
DK14X8 385 225 205 50 95 4 9 6.87 7.56
DK15X8 413 225 205 50 80 5 9 7.94 8.73
DK16X8 448 235 205 50 85 5 9 8.2 9.08
DK18X8 483 235 205 50 95 5 9 9.09 10
DK20X8 535 235 205 50 90 6 11 10.21 11.23
DK22X8 585 235 205 50 100 6 11 11.5 12.65
DK24X8 630 235 205 50 88 6 11 12.21 13.43
DK16X10 460 286 254 70 73 6 11 12.73 14
DK20X10 545 286 254 70 88 6 11 16.52 18.17
DK22X10 605 292 264 70 100 6 11 17.69 19.45
DK23X10 615 292 264 70 85 7 11 18.48 20.33
DK24X10 635 292 264 70 88 7 11 19.8 21.78
DK25X10 653 292 264 70 90 7 11 20.1 22.21
DK26X10 691 292 264 70 98 7 11 20.9 22.99
DK27X10 701 292 264 70 85 8 11 21.7 23.87
DK28X10 745 292 264 70 90 8 11 22.4 24.64

Elevator Buckets

  • Over 12 different elevator bucket styles are available for agricultural and industrial applications.
  • A direct replacement for many other international brands.
  • Unique elevator bucket design with multiple patents.
  • Our elevator buckets are well regarded, worldwide for high price/quality ratio.
123

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost 31 34 37 40 34 34
Wear Resistance 40 34 37 31 40 34
Impact Resistance 31 31 37 31 40 31
FDA Food Approved 29 30 30 30 30 30
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high-temperature applications.

MEASURE AN ELEVATOR BUCKET

elevator-buckets1
ELEVATOR BUCKET VENTING

A venting bucket can improve the eficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

Venting Options

elevator-buckets2

Vent Pattern 1

One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

elevator-buckets3

Vent Pattern 2

One row of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets4

Vent Pattern 3

Two rows of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets5

Vent Pattern 4

Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

elevator-buckets6

Custom Vent

Vented as required.