P12-M-Type-Bucket

M Type Bucket

pdf download

HDPE / Nylon / PU

Mid-deep bucket for agricultural application, suitable for variety of elevators with broader elevating speed range and larger elevating capacity.

Features :

  • Medium bottom elevator bucket for agricultural use.
  • Optimized bucket design:
    • Thicker leading edges for increased abrasion resistance
    • Reinforced ribs for greater structural integrity
    • Optimum discharge angle
    • Large water level for higher capacity
  • Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.
P12 M Type Bucket Drawing

Using Recommendations

  • Minimum bucket spacing: bucket depth “C” +5mm.
  • For engineering purposes, we recommend using “ (Z-Y) +10%” for usable capacity.
  • Mounting holes can be customized on request.
  • Venting holes are available in 5 patterns on request.

Model Bucket Dimension (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C From Top D Hole Centres E No. of Holes Hole Diameter Water Level (Z-Y) Total Level(X-Y)
M1009 105 95 65 20 50 2 7 0.25 0.33
M1312 135 125 85 25 70 2 7 0.5 0.7
M1514 160 150 110 25 70 2 8.5 1.15 1.4
M1814 185 150 110 25 100 2 9 1.35 1.75
M2014 215 155 110 25 100 2 9 1.58 1.98
M2814 285 150 110 25 90 3 9 2.2 2.6
M2316 250 175 130 35 120 2 9 2.3 3
M2816 290 175 130 35 80 3 9 2.7 3.5
M2818 290 185 140 35 80 3 11 3.11 4.01
M3018 318 185 140 36 100 3 11 3.43 4.42
M3021 310 230 165 40 100 3 11 5 6.5
M3321 340 230 165 40 120 3 11 5.4 7.1
M3721 380 230 165 40 90 4 11 6.2 8.1
M4021 410 230 165 40 100 4 11 7.1 8.9
M4421 450 230 165 40 90 5 11 7.5 9.85
M5021 520 235 170 40 100 5 11 8.5 10.76

* Actual dimensions of the elevator buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE elevator buckets. Size A, B and C for Nylon and PU elevator buckets will be about dimensionally 2% larger than HDPE elevator buckets.


Elevator Buckets

  • Over 12 different elevator bucket styles are available for agricultural and industrial applications.
  • A direct replacement for many other international brands.
  • Unique elevator bucket design with multiple patents.
  • Our elevator buckets are well regarded, worldwide for high price/quality ratio.
123

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost 31 34 37 40 34 34
Wear Resistance 40 34 37 31 40 34
Impact Resistance 31 31 37 31 40 31
FDA Food Approved 29 30 30 30 30 30
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high-temperature applications.

MEASURE AN ELEVATOR BUCKET

elevator-buckets1
ELEVATOR BUCKET VENTING

A venting bucket can improve the eficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

Venting Options

elevator-buckets2

Vent Pattern 1

One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

elevator-buckets3

Vent Pattern 2

One row of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets4

Vent Pattern 3

Two rows of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets5

Vent Pattern 4

Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

elevator-buckets6

Custom Vent

Vented as required.


9
10

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.