P09-SK-Bucket

SK Heavy Duty Bucket

pdf download

HDPE / Nylon / PU

High strength shallow bucket for agricultural application.

P09 SK Heavy Duty Bucket Drawing

Model Bucket Dimension (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C From Top D Hole Centres E No. of Holes Hole Diameter Water Level (Z-Y) Water Level(Z-Y)+10%
SK1814 186 140 87 30 100 2 9 0.85 0.89
SK1914 190 146 105 25 100 2 9 1.2 1.26
SK2314 235 143 96 30 120 2 9 1.29 1.35
SK2814 285 143 96 30 90 3 9 1.67 1.75
SK2315 235 155 91 30 120 2 9 1.51 1.59
SK2815 285 155 91 30 90 3 9 1.87 1.96
SK2316 238 170 102 35 120 2 9 1.43 1.5
SK2816 290 165 108 35 90 3 9 2.2 2.31
SK3216 330 165 111 35 80 4 9 2.36 2.48
SK2417 247 178 120 40 120 2 9 2.18 2.3
SK2817 289 178 120 40 90 3 9 2.52 2.65
SK2917 295 181 120 35 115 3 9 2.98 3.13
SK3321 337 219 140 40 85 4 9 4.23 4.44
SK3823 380 233 165 45 100 4 9 6 6.3
SK2824 295 248 168 45 100 3 9 5.6 5.9
SK3325 335 265 170 50 85 4 9 6.55 6.9
SK4726 470 265 170 50 95 5 11 9.4 9.9
SK5626 569 265 170 50 120 5 11 11.75 12.35

Elevator Buckets

  • Over 12 different elevator bucket styles are available for agricultural and industrial applications.
  • A direct replacement for many other international brands.
  • Unique elevator bucket design with multiple patents.
  • Our elevator buckets are well regarded, worldwide for high price/quality ratio.
123

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost 31 34 37 40 34 34
Wear Resistance 40 34 37 31 40 34
Impact Resistance 31 31 37 31 40 31
FDA Food Approved 29 30 30 30 30 30
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high-temperature applications.

MEASURE AN ELEVATOR BUCKET

elevator-buckets1
ELEVATOR BUCKET VENTING

A venting bucket can improve the eficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

Venting Options

elevator-buckets2
Vent Pattern 1

One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

elevator-buckets3
Vent Pattern 2

One row of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets4
Vent Pattern 3

Two rows of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets5
Vent Pattern 4

Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

elevator-buckets6
Custom Vent

Vented as required.