Buy fluoxetine hcl online : Fluoxetine hydrochloride buy
order fluoxetine online
P17-SS-Bucket

SS Type Steel Bucket

pdf download

Carbon Steel/Stainless Steel

Shallow seamless pressed steel buckets without welds or joints. Smooth inner and outer surface facilitate materials discharging. Excellent overall strength.

Features :

  • Shallow bottom style for higher capacity at closer bucket spacing.
  • Monobloc pressed seamless construction. The Smooth inner and outer surface finish assist with a cleaner discharge of products.
  • Well suited to high temperature applications, or where heavy products or sharp products are likely to be elevated.
P17 SS Bucket Drawing

Using Recommendations

  • Minimum bucket spacing:: bucket depth ”C” +5mm and minimum bucket spacing: bucket projection “B” +25mm .
  • Special thickness is available on request.
  • Venting holes are available in 5 patterns on request.

Model Bucket Dimension (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C Thickness From Top D Hole Centres E No. of Holes Hole Diameter Water Level (Z-Y) Total Level(X-Y)
SS1009 106 89 60 1 20 50 2 9 0.19 0.29
SS1312 140 115 78 1.0-1.5 22 70 2 9 0.41 0.61
SS1814 188 140 92 1.0-1.5 28 100 2 9 0.9 1.29
SS2314 237 142 92 1.0-1.5 28 120 2 9 1.26 1.7
SS2316 238 168 108 1.0-1.5 35 120 2 9 1.65 2.25
SS2814 287 142 92 1.5-2.0 28 90 3 9 1.56 2.11
SS2816 289 168 108 1.5-2.0 38 80 3 11 2.08 2.91
SS3018 308 185 116 2.0-2.5 35 100 3 11 2.46 3.66
SS3316 330 165 108 2.0-2.5 38 100 3 9 2.41 3.3
SS3021 310 217 140 2.0-2.5 38 100 3 11 4 5.5
SS3321 340 218 130 2.0-2.5 38 120 3 11 3.92 5.51
SS3721 384 218 130 2.0-2.5 38 89 4 11 4.18 6.18
SS4521 466 216 130 2.0-2.5 38 89 5 11 5.59 8
SS4626 465 260 170 2.0-2.5 50 95 5 11 7 10.7
SS5626 565 265 170 2.0-2.5 50 110 5 11 10.5 15

Note: Some Models subject to availability. Steel elevator buckets are supplied complete with standard recessed holes. Special drilling is available on request.


Elevator Buckets

  • Over 12 different elevator bucket styles are available for agricultural and industrial applications.
  • A direct replacement for many other international brands.
  • Unique elevator bucket design with multiple patents.
  • Our elevator buckets are well regarded, worldwide for high price/quality ratio.
123

Buy fluoxetine hcl online - Buy fluoxetine online

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost 31 34 37 40 34 34
Wear Resistance 40 34 37 31 40 34
Impact Resistance 31 31 37 31 40 31
FDA Food Approved 29 30 30 30 30 30
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high-temperature applications.

MEASURE AN ELEVATOR BUCKET

elevator-buckets1
ELEVATOR BUCKET VENTING

A venting bucket can improve the eficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

Venting Options

elevator-buckets2

Vent Pattern 1

One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

elevator-buckets3

Vent Pattern 2

One row of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets4

Vent Pattern 3

Two rows of 6mm or 8mm holes
in body on 25mm centers.

elevator-buckets5

Vent Pattern 4

Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

elevator-buckets6

Custom Vent

Vented as required.


9
10

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.